Polaris Universal ATV 2000 Owner's Safety And Maintenance Manual page 91

MAINTENANCE
Lubrication Recommendations
13. Front A Arm Grease**∆ Locate fitting on pivot shaft and
Pivot Shaft grease with grease gun.
14. Counter Bal- SAE 10/30 Check level on dipstick and add oil as
ance Housing necessary. Change annually. To
(400) change oil see page 108.
15. Steering Post Grease** Locate fittings on steering post and
Bushings grease with grease gun.
16. Rear Axle Grease** Locate fittings and grease
Bearing
17. Swing Arm Grease** Locate fittings on swing arm and
Bushings grease with grease gun.
18. Upper Control Grease**∆ Locate fittings and grease
Arms
19. Lower Control Grease**∆ Locate fittings and grease
Arms
20. Rear Wheel Grease**∆ Locate fitting and grease
Hub Bearing Car-
rier
21. Rear Anti-Roll Grease Locate fitting and grease
Bar
* More often under severe use, such as wet or dusty conditions.
**Polaris Premium all Season Grease or grease conforming to NLGI No. 2, such as
Conoco Superlube M or Mobilegrease Special.
+ Grease every 500 miles, or after submerging in water or before long periods of storage or
after pressure washing. Always use Polaris Premium U-Joint Lube for maximum service of
these driveline components (PN 2871515 3 oz.)(PN 2871551 14 oz.).
∆ When suspension action becomes stiff or after washing.
NOTE: Hours are based on 10 mph average.
83
Every 3
months or 50
hours
Check month-
ly and change
annually
Every 3
months or 50
hours
Every 3
months or 50
hours
Monthly or at
20 hours
Semi-annually
Semi-annually
Semi-annually
Semi-annually