Subscribe to Our Youtube Channel
Related Manuals for Ozito OZCM44A
Summary of Contents for Ozito OZCM44A
- Page 1 Cement Mixer 370 Watt Operation Manual 1 Year Replacement Warranty OZCM44A 0209 www.ozito.com.au To view the full range visit:...
-
Page 2: Specifications
SPECIFICATIONS – MODEL NO. OZCM44A Input: 230 – 240V ~ 50Hz Motor Size: 370W Motor Speed: 1440/min Drum Speed: 23-26/min Gross Drum Volume: 220 Litres (7.7 cu ft) Unmixed Dry Volume: 170 Litres (6 cu ft) Mixed Wet Volume: 125 Litres (4.4 cu ft) Drum Mouth: Ø470mm (18... -
Page 3: Table Of Contents
TABLE OF CONTENTS SPECIFICATIONS………………………………………… Page 2 TABLE OF CONTENTS………………………………….. Page 3 INTRODUCTION………………………………………... Page 4 SAFETY INSTRUCTIONS……………………………….. Page 4 ASSEMBLY……………………………………………….. Page 8 OPERATION …………………………………………….. Page 9 MAINTENANCE …………….………………………….. Page 10 CONTENTS ……………………………………………... Page 11 WARRANTY……………………………………………… Page 12... -
Page 4: Introduction
The electric motor has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. - Page 5 GENERAL SAFETY INSTRUCTIONS Warning! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “Power Tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool.
- Page 6 GENERAL SAFETY INSTRUCTIONS (cont.) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
- Page 7 ADDITIONAL SAFETY RULES FOR CEMENT MIXER Warning! For your own safety, do not try to use your cement mixer or plug it in until it is completely assembled and installed according to the instructions and until you have read and understood the following: •...
-
Page 8: Assembly
ASSEMBLY 1. Insert the rear leg of the stand into the Bolt & nut front frame using the nut and bolt supplied. Frame Tighten the bolt . The rear leg is also used Rear leg to move the mixer to other locations. (Fig. 1) Fig. -
Page 9: Operation
ASSEMBLY (cont.) 6. Insert the dump control handle through the Dump control hole in the motor gear box frame. Locate 2 handle notches on the inside of the motor housing, align with the handle and push the handle to fit securely in the notches. -
Page 10: Maintenance
9. Check and maintain tyre pressure @ 206kPa (30psi) Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the tool by an unauthorised person or by mishandling of the tool. -
Page 11: Contents
Please recycle packaging where facilities exist. Check with your local council authority for recycling advice. CONTENTS 1 x OZCM44A Cement Mixer (not assembled; see Page 8 of instruction manual) 1 x Instruction Manual OZITO INDUSTRIES PTY LTD AUSTRALIA (Head Office) -
Page 12: Warranty
PURCHASED FROM: ________________________________________________ DATE PURCHASED: ________________________________________________ 1 YEAR REPLACEMENT WARRANTY Your Ozito tool is guaranteed for a period of 12 months from the original date of purchase and is intended for DIY (Do it yourself) use only. WARNING The following actions will result in the warranty being void.
Need help?
Do you have a question about the OZCM44A and is the answer not in the manual?
Questions and answers