Table of Contents INTRODUCTION ..................................3 ASSEMBLY AND OPERATING PROCESS ......................... 3 LED 256 P ........................3 EMOVE THE ANEL FROM THE BOX Mounting power supply on the light stand ......................... 4 Plug the AC to DC power supply into the AC ........................5 Turn on the panel ................................
Introduction This is the operations manual for the Cool Lights USA CL-LED256 LED Panel. The exact models available are the CL-LED25656S (5600K spot panel) and the CL-LED25632S (3200K spot panel). Your LED 256 panel puts out a comparable hard light to a tungsten 300w fresnel based on light meter readings.
This is the main DC power input from whatever external power supply you may use to power the LEDs—including of course the Cool Lights AC to DC power supply that came with the panel. Simply attach the 4 pin XLR from the power supply into the mating connector on the Figure 3 –...
simply attach the carabiner to one of the thumbscrews of the light stand or to the yoke. You can wrap the nylon strap around the base of the light stand, etc. Many different configurations are possible with this included type of attachment. Of course, you can also just lay the power supply on the floor at the base of the light stand as well, but it is recommended to use the carabiner to hang on the light stand for optimum heat dispersion from the power supply into the air.
LED 256 panel from this type of power supply. Barndoors . The CL-LED256 LED Panel includes as standard a barndoor unit which fits into the accessory holder on the front of the panel.
2). Find the 4 keys on the battery plate and on the plate interface on the LED 256. Line them up and insert the plate on the keys. Then, slide the plate down until it won’t go further. 3). Replace the L bracket and screw to keep the plate locked in place. 4).
protected against this scenario, you run the risk of damaging your AC to DC power supply in this case! While it may work in some scenarios, there are too many scenarios to cover, thus we cannot recommend but using one power input of the 2 available at any given time. Filter Panel Set Your LED 256 comes with a set of 4 acrylic filter panels which can fit behind the barndoors of the...
Operating Specifications and Parameters General Specifications Dimensions: 5" x 5" x 3.25" Weight: 1 Lb. 15 ounces. Construction: Powder coated (black) aluminum LED Type: 5mm Round LEDs in 3200K or 5600K versions LED Beam Angle: 40 degree for "spot" panel and 60 degree for "flood" panel LED CRI: - 5600K Spot: 80 CRI - 3200K Spot: 85 CRI...
All readings in Lux taken with light meter. Conclusion This completes setup and testing of the Cool Lights CL-LED256 256 LED Panel. With proper care, you should get many years of service out of its sturdy aluminum construction. Thanks for...
Need help?
Do you have a question about the CL-LED256 and is the answer not in the manual?
Questions and answers