Download Print this page

Advertisement

HD COLOR CAMERA
DK-H100

OPERATING INSTRUCTIONS

Please read these operating instructions carefully for proper operation,
and keep them for future reference.

Advertisement

   Also See for Hitachi DK-H100

   Related Manuals for Hitachi DK-H100

   Summary of Contents for Hitachi DK-H100

  • Page 1: Operating Instructions

    HD COLOR CAMERA DK-H100 OPERATING INSTRUCTIONS Please read these operating instructions carefully for proper operation, and keep them for future reference.

  • Page 2

    Note: The model and serial numbers of your product are important for you to keep for your convenience and protection. These numbers appear on the nameplate located on bottom of the product. Please record these numbers in the spaces provided below, and retain this manual for future reference.

  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS Carefully read all safety messages in this manual and safety Instructions on your equipment. Follow recommended precautions and safe operating practices. SAFETY ALERT SYMBOL This is the “Safety Alert Symbol.” This symbol is used to call your attention to items or operations that could be dangerous to you or other persons using this equipment.

  • Page 4: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All warnings on the product and the operating instructions should be adhered to. 4.

  • Page 5

    14. Lightning For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges.

  • Page 6

    WICHTIGE SICHERHEITSANWEISUNGEN 1. Alle Anweisungen lesen. Vor Betrieb des Erzeugnisses sollten alle Sicherheits-und Bedienungsanleitungen gelesen werden. 2. Die Anweisungen aufbewahren. Die Sicherheits-und Bedienungsanleitungen sollten fünftigen Bezug aufbewahrt werden. 3. Warnungen beachten. Die Warnungen auf dem Erzeugnis und in den Bedienungsanleitungen solten beachtet werden. 4.

  • Page 7

    14. Blitzschlag Für zusätzlichen Schutz des Erzeugnisses während eines Gewitters oder bei Nichtverwendung für lange Zeit den Stecker aus der Steckdose ziehen. Dies verhütet Beschädigung durch Blitzschlag und Netzspannungsstöße. 15. Überlastung Wandsteckdosen, Verlängerungskabel und eingebaute Bequemlickkeitssteckdosen nicht überlasten, da dies Feuer oder elektrischen Schlag verursachen kann. 16.

  • Page 8

    MISES EN GARDE IMPORTANTES 1. Lire les instructions Lire toutes les instructions de sécurité et de fonctionnement avant de faire fonctionner l’appareil. 2. Conserver ces instructions Conserver les instructions de sécurité et de fonctionnement á des fins de référence ultérieure. 3.

  • Page 9

    14. Foudre Pour renforcer la protection de l’appareil pendant un orage, ou si l’on s’en éloigne ou qu’on reste longtemps sans l’utiliser, le débrancher de la source d’alimentation. Ceci permettra d’éviter tout dommage de l’appareil dú á la foudre et aux surtensions de ligne. 15.

  • Page 10: Important Notice

    Operation of this product in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. WARNING Changes or modifications not expressly approved by Hitachi Kokusai Electric responsible for compliance could void the user’s authority to operate the equipment. For Canada This product does not exceed the class A/class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations.

  • Page 11: Table Of Contents

    Contents Outline and features ..............................1 Warnings and cautions when using ........................2 Facility names and functions ...........................3 Filter selection .................................4 White and black balance adjustment ........................8 Electronic shutter setting ............................13 Function menu...............................14 Specifications ................................33 Service information..............................35...

  • Page 13: Outline And Features

    The camera is ideal for graphic stands point of view scene detail, also provides two separate and remote observation applications. settings that can be used separately or With its 2.3million pixels 3-CCD, the DK-H100 simultaneously. provides outstanding performance. The camera offers Automatic Skin tone detail provides an easy sharper and cleaner HD images due to its 14-bit A/D converters and Hitachi’s implementation of the latest...

  • Page 14: Warnings And Cautions When Using

    Disconnect from power and contact the nearest Keep foreign object out of interior Entry of water, metallic or other foreign materials Hitachi Kokusai Electric service agency. can cause failure and damage. Select use and storage locations carefully Avoid using or storing the equipment in the...

  • Page 15: Facility Names And Functions

    Facility names and functions 1. Lens mount 9. FILTER button Bayonet type lens mount. It combines with the L/R button, and the ND filter is controlled. It combines with the U/D button, and the ECC 2. SDI OUT connector HD-SDI/SD-SDI signal output. filter is controlled.

  • Page 16: Lens Installation

    Lens installation Lens installation Install according to the following procedure. 1. Raise the lens lever and remove the mount cap. 3. Lower the lens lever to secure the lens. 2. Align the lens center mark with the indent at the 4.

  • Page 17

    Lens flangeback adjustment Lens flangeback adjustment When operating a zoom lens, if the focus is not precisely aligned at both the telephoto and wide angle extremes of the lens, the flangeback (distance from the lens mounting plane to the focal plane) is adjusted. This adjustment is generally required only once unless the lens is replaced.

  • Page 18: White Shading Adjustment

    White shading adjustment White shading adjustment White shading adjustment is recommended after replacing the lens. The adjustment relates to the camera vertical coloration. If the lens includes an extender, the shading can be optimized for both extender on and off modes. (Vertical coloration refers to an effect whereby the image of an overall white sheet of paper tends toward green at the top and magenta at the bottom, or vice versa.) Adjustment...

  • Page 19: Filter Selection

    Filter selection Filter setting In order to obtaining correct white balance, the sufficient optical filter selection is required accordance with the scene lighting source. The correct optical filter according to the scene light source needs to be selected in order to obtain correct white balance. Operation method Set the FILTER button and the L/R button.

  • Page 20: White And Black Balance Adjustment

    White and black balance adjustment White balance adjustment White balance will be adjusted to the best effort in the sequence of AWB (auto white balance), ABB (auto black balance), and again AWB. Readjustment is normally not required even at power off/on. Be sure to adjust the white balance after changes in the lighting conditions.

  • Page 21

    White and black balance adjustment Auto white balance error messages When auto white balance adjustment fails, the following error messages will be displayed on the screen for about 6 seconds. Message Cause Correction The color bar signal is output. Press the D button to turn off the color bar AUTO WHITE:NG signal.

  • Page 22

    White and black balance adjustment Black balance adjustment Black balance requires adjustment in the following situations. Equipment being used for the first time Equipment idle for an extended period Large change of ambient temperature Gamma setting changed 1. Hold the R button depressed for two second. Black balance is adjusted automatically. 2.

  • Page 23

    White and black balance adjustment Auto black balance error messages When auto black balance adjustment fails, the following error messages appear on the screen for about 6 seconds. Message Cause Correction AUTO BLACK:NG The color bar signal is output. Press the D button to turn off the color CHANGE TO CAM bar signal.

  • Page 24

    White and black balance adjustment Gray scale auto set up BLAK, GAIN, FLARE and GAMMA parameter can be adjusted automatically using with the gray scale chart. Gray scale chart with gate marker in the screen. Gate marker Gray scale auto set up can be accessed from Function menu or the Remote control unit and following message is displayed during auto set up working GRAYSCALE SETUP ■BLACK:...

  • Page 25: Electronic Shutter Setting

    Electronic shutter setting Shutter modes The selectable electronic shutter modes and speeds are as follows. Mode Shutter speeds Applications PRESET 1/100(59.94i), 1/60(50i), Clear images of quickly moving objects. 1/250, 1/500,1/1000,1/2000 second LOCK SCAN When shooting the computer monitor, It’s 59.94i image scroll.

  • Page 26: Function Menu

    Function menu 1. Operation and menu screen The function menu screen show up by pressing the MENU button. The menu describes the camera functions and structure with multiple pages. First page of structure is named TOP MENU. This TOP MENU screen is appeared (ON) and disappeared (OFF) by pressing the MENU button. TOP MENU Top menu has the major camera function items and the selection cursor in the screen which cursor can be moved by the U or D button.

  • Page 27

    Function menu 2. TOP MENU and MAIN MENU...

  • Page 28

    Function menu 3. COLOR MENU (MAIN MENU and SUB MENU) ■COLOR MENU ■MASTER GAIN:<   SCENE 0  MASTER GAIN:>  PRESET     :0dB  WHITE  GAIN:>  MODE       :PRESET  BLACK/FLARE:>  AGC LIMIT  :+18dB  GAMMA      :>>  KNEE/CLIP  :>>  LOW  SET   :0dB  MASKING    :>>>  MID  SET   :3dB  HIGH SET   :6dB  INITIALIZE : ■WHITE GAIN :<   SCENE 0  W.BAL MODE :MEMORY  R GAIN     :   0  G GAIN     :   0  B GAIN     :   0  INITIALIZE :  ■BLACK/FLARE:<   SCENE 0  R BLACK    :   0  G BLACK    :   0  B BLACK    :   0  R FLARE    :   0  G FLARE    :   0  B FLARE    :   0  FLARE      :ON  M.BLACK    :   0  INITIALIZE :...

  • Page 29

    Function menu 4. DETAIL MENU (MAIN MENU and SUB MENU) Note Note Typical picture for explaining of DTL functions CH1/CH2 A.PHASE adjustment When selected CH1 or CH2 A.PHASE item, Skin tone DTL phase auto marker is displayed in the center of the picture. Move the camera shooting position where you want to set Skin tone DTL and push function key one second.

  • Page 30

    Function menu 5. MAINTENANCE MENU (MAIN MENU and SUB MENU) ■MAINTENANCE MENU ■AUTO SETUP :<  AUTO SETUP :>  CH1.A.PHASE:PUSH > 1SEC  WHT SHADING:>  CH2.A.PHASE:PUSH > 1SEC  AUTO IRIS  :>  SHUTTER    :>  GRAY SCALE :PUSH > 1SEC  SYSTEM     :>   BLACK LEV :   5.00%  CHECK      :>   FLARE LEV :  12.00%   GAMMA LEV :  58。00% ■WHT SHADING:<  EXTENDER   :OFF(x1)  WHT SHADING:PUSH > 1SEC   R V SAW   :   0   G V SAW   :   0   B V SAW   :   0  INITIALIZE : ■AUTO IRIS  :<  AUTO IRIS  :REMOTE  IRIS TRIM  :   0  IRIS SPEED :   0  PEAK/AVE   :0/10  IRIS GATE  :   1  OPEN  LIMIT: 127  CLOSE LIMIT: -85  INITIALIZE : ■SHUTTER    :<   SCENE 0...

  • Page 31

    Function menu 6. FILE MENU (MAIN MENU) ■FILE MENU  FILE SELECT:SCENE 0  STORE FILE :SCENE 1  STORE      :  ALL INITIALIZE : 7. VF MENU (MAIN MENU and SUB MENU) ■VF MENU ■VF DETAIL  :< ■MARKER1 SEL:<USER 1 VF OUT SEL :COLOR  VF DETAIL  :OFF  CENTER MARK:OFF  VF DETAIL  :>  DTL LEVEL  : 0  SAFETY MARK:OFF  VF MARKER  :>  CRISP      :   0  SIDE   4:3 :OFF  SIDE PANEL :> 13:9 :OFF  VF DISPLAY :> 14:9 :OFF  VF ZEBRA   :> 15:9 :OFF  CROSS      :OFF  BOX1       :OFF...

  • Page 32

    Function menu 8. Each menu item and description 8.1 COLOR main menu Item Description ■COLOR MENU      SCENE 0 MASTER GAIN Change to MASTER GAIN menu.  MASTER GAIN:> WHITE GAIN Change to WHITE GAIN menu.  WHITE  GAIN:> BLACK/FLARE Change to BLACK/FLARE menu.  BLACK/FLARE:>  GAMMA      :>> GAMMA Change to GAMMA menu.  KNEE/CLIP  :>>...

  • Page 33

    Function menu 8.1.4 GAMMA 1 sub menu (COLOR MENU) Initial ■GAMMA     1:>   SCENE 0 Item Setting Description setting  R GAMMA    :   0 R GAMMA -128 to 127 Adjust Red Gamma  G GAMMA    :   0 G GAMMA -128 to 127 Adjust Green Gamma  B GAMMA    :   0 B GAMMA -128 to 127 Adjust Blue Gamma  TOTAL GAMMA:   0...

  • Page 34

    Function menu 8.1.8 MASKING 1 sub menu (COLOR MENU) Initial Item Setting Description setting R HUE, SAT -64 to +63 Adjust Red hue, saturation Y-R HUE, SAT -64 to +63 Adjust Yellow - Red hue, saturation Y HUE, SAT -64 to +63 Adjust Yellow hue, saturation G-Y HUE, SAT -64 to +63...

  • Page 35

    Function menu 8.2 DETAIL main menu Initial Item Setting Description setting DETAIL Change screen to DETAIL menu. - - SKIN DTL Change screen to SKIN DTL menu. - - HIGH CHROMA Change screen to HIGH CHROMA menu. - - 8.2.1 DETAIL 1 sub menu (DETAIL MENU) Initial ■DETAIL    1:>   SCENE 0...

  • Page 36

    Function menu 8.2.3 SKIN DTL 1 sub menu (DETAIL MENU) Initial ■SKIN DTL  1:>   SCENE 0 Item Setting Description setting  CH SELECT  :1ch CH SELECT 1ch,2ch CH selection for skin tone detail  CH1.A.PHASE:PUSH > 1SEC CH1 A.PHASE Set CH1 skin tone detail phase *1 - -  S.DTL LEVEL: -128        PHASE:  97  Ye-R LEVEL -128 to +127 -128 Adjust CH1 skin tone detail level...

  • Page 37

    Function menu 8.3 MAINTENANCE main menu Item Description ■MAINTENANCE MENU AUTO SETUP Change screen to AUTO SETUP menu.  AUTO SETUP :> WHT SHADING Change screen to WHT SHADING menu.  WHT SHADING:> AUTO IRIS Change screen to AUTO IRIS menu.  AUTO IRIS  :>  SHUTTER    :> MIC GAIN Change screen to MIC GAIN menu.  SYSTEM     :>...

  • Page 38

    Function menu 8.3.3 AUTO IRIS sub menu (MAINTENANCE MENU) Initial ■AUTO IRIS  :< Item Setting Description setting  AUTO IRIS  :REMOTE AUTO IRIS REMOTE,AUTO AUTO Setting of Iris control mode. *1 IRIS TRIM -128 to 127 Adjust Auto iris output level  IRIS TRIM  :   0  IRIS SPEED :   0 IRIS SPEED -128 to 127 Speed control of the Iris response  PEAK/AVE   :0/10...

  • Page 39

    Function menu 8.3.5 SYSTEM sub menu (MAINTENANCE MENU) Initial ■SYSTEM     :<     Item Setting Description setting  CAMERA ID  : 1 CAMERA ID 1 to 99 Setting of camera  FAN MODE   :AUTO number  GL H PHASE :-512 FAN MODE OFF,AUTO,LOW,HIGH AUTO Setting of FAN mode  MON OUT    :MONITOR  TIME/DATE  :> GL H PHASE -512 -512 Adjustment of GL Phase  FORMAT     :>...

  • Page 40

    Function menu 8.3.9 CHECK sub menu (MAINTENANCE MENU) Initial ■CHECK      :< Item Setting Description setting  TEST       :OFF TEST OFF,ON TEST signal ON and OFF  GAMMA      :ON GAMMA OFF,ON GAMMA function ON and OFF  DETAIL     :ON  MASKING    :ON DETAIL OFF,ON DETAIL function ON and OFF  KNEE       :ON MASKING OFF,ON MASKING function ON and OFF...

  • Page 41

    Function menu 8.5 VF main menu Initial ■VF MENU Item Setting Description setting VF OUT SEL :COLOR COLOR  VF DETAIL  :> VF OUT SEL COLOR Y,R,G,B  VF MARKER  :>  SIDE PANEL :> VF DETAIL Change to VF DETAIL menu.  VF DISPLAY :> VF MARKER Change to VF MARKER menu.  VF ZEBRA   :> SIDE PANEL Change to SIDE PANEL menu.

  • Page 42

    Function menu 8.5.3 MARKER1 SEL/ MARKER2 SEL sub menu (VF MENU) Initial Item Setting Description setting CENTER MARK ON,OFF Center marker ON and OFF. SAFETY MARK ON,OFF Safety Maker ON and OFF. Side 4:3 marker ON and OFF SIDE ON,OFF Side 13:9 Marker ON and OFF 13:9 ON,OFF...

  • Page 43

    Function menu 8.5.5 BOX1 SET/BOX2 SET sub menu (VF MENU) Initial ■BOX1 SET   :<USER 1 Item Setting Description setting  H POSITION : 30 H POSITION 0 to 255 Adjust horizontal position.  V POSITION : 25 V POSITION 0 to 255 Adjust vertical position.  H SIZE     : 15  V SIZE     : 10 H SIZE 0 to 255 Adjust H.

  • Page 44

    Function menu 8.5.7 SIDE PANEL sub menu (VF MENU) Initial Item Setting Description setting SIDE PANEL OFF, Only when DISP SIZE is 16:9, it is effective. 4:3, 13:9, 14:9, 15:9 CONTRAST 1 to 5 Set side panel contrast BRIGHT 1 to 5 Set side panel brightness 8.5.8 VF DISPLAY sub menu (VF MENU) Initial...

  • Page 45: Specifications

    Specifications DK-H100 2/3-inch, IT-CCD 2.3 million pixels Signal format 1080/59.94i, 1080/50i, 480/59.94i, 576/50i Aspect ratio 16:9 (HD/SD), 4:3 (SD) switchable Prism F1.4 1X motorized filter wheel w/ 4 filter positions Optical Filter (Clear, 1/4 ND, 1/16 ND, 1/64 ND) ECC Filter...

  • Page 46

    Specifications Dimensions ・DK-H100...

  • Page 47: Service Information

    Service information Connector pin diagrams LENS connector Signal Signal AUX SW IRIS POSITION CALL TRG IRIS A/R EXETEND ENF AUTO ZOOM POS IRIS CONTROL F POS / L TX +12V L RX REMOTE1 connector Signal +12V output SD input SD output SD GND VF OUT connector Signal...

  • Page 48

    Service information The solution in the case of having changed into the output mode which the color monitor does not support. When it changes to the output mode which the connected color monitor does not support, an image does not appear. And the output mode change by a menu is difficult. Change of the output mode of a camera is in the state which stopped the camera power supply and pushed the rear button, and is possible by switching on a power supply.

This manual also for:

Dk-z50

Comments to this Manuals

Symbols: 0
Latest comments: