White and black balance adjustment
Gray scale auto set up
BLAK, GAIN, FLARE and GAMMA parameter can be adjusted automatically using with the gray scale
chart.
Gray scale chart with gate marker in the screen.
Gray scale auto set up can be accessed from Function menu or the Remote control unit and following
message is displayed during auto set up working
.
Following messages are displayed as an auto set up result.
CHANGE TO CAM
NOT GRAYSCALE
SETUP OK!!!
BLACK: NG M.BLACK
GAIN(GAMMA/FLARE) NG R
GAIN(GAMMA/FLARE) NG G
GAIN(GAMMA/FLARE) NG B
GAIN(GAMMA/FLARE) NG R/G
GAIN(GAMMA/FLARE) NG R/B
GAIN(GAMMA/FLARE) NG G/B
GAIN(GAMMA/FLARE) NG R/G/B (R&G&B CH error)
BREAK OFF
GRAYSCALE SETUP
■BLACK:
GAIN :
FLARE:
GAMMA:
(*: Cursor move to set up item.)
Gate marker
(Error: Change Bar to CAM)
(Not in the gate marker or no gray chart)
(Finish set up)
(Master black setup error)
(R CH error)
(G CH error)
(B CH error)
(R&G CH error)
(R&B CH error)
(G&B CH error)
12