Hyundai Accent 2012 Owner's Manual page 328

3. Check the removed fuse; replace it if it
is blown. To remove or insert the fuse,
use the fuse puller in the engine com-
partment fuse panel.
4. Push in a new fuse of the same rating,
and make sure it fits tightly in the clips.
If it fits loosely, consult an authorized
HYUNDAI dealer.
CAUTION
After checking the fuse panel in the
engine compartment,
install the fuse panel cover. If not,
electrical failures may occur from
water contact.
securely
Multi fuse
If the multi fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery cable.
3. Remove the fuse panel in the engine
compartment.
4. Remove the nuts shown in the picture
above.
5. Replace the fuse with a new one of the
same rating.
6. Reinstall in the reverse order of
removal.
I n f o r ma t i o n P r o v i d e d b y :
✽ ✽ NOTICE
• If the multi fuse is blown, consult an
authorized HYUNDAI dealer.
• Before remove the multi fuse, discon-
nect the (-) terminal of battery.
ORB070022
Maintenance
7 53