Table of Contents
Advertisement
7. Camera Selection
The #7 & #8 positions of SW1 on PCB are used for the zoom module camera selection. The protocol
used for the included zoom module is equivalent to the LG standard and is preset at our factory.
8. Basic Function & Operation
This speed dome camera can be controlled by Keyboard, Matrix, DVR or Network Video Server etc.
Under the control of these devices, this camera can achieve pan/tilt movement, lens control, preset,
synchronized scanning, and OSD functions.
Pan & Tilt Rotation
Use the direction arrows on the front panel of your DVR or a joystick controller to control pan and tile
functions. The moving speed of the dome camera depends on the offset size of the joystick, the speed
range is from 0.3°/sec to 120°/sec.
Lens Operations
Zoom
Press the buttons of the ZOOM controls until the screen displays the picture that you need.
Focus
Your camera has Auto-focus. Press the FOCUS controls of your equipment if further adjustment is
needed. Also, bumping the pan or zoom control can cause your Auto-focus function to readjust.
Your PTZ dome can memorize preset positions. Areas of high activity or concern can be viewed quickly
by "Calling" a "Preset". This action will pan, tilt, and zoom the camera to a predetermined view within a
fraction of the time it would take for you to do the same thing manually. A digital controller or "Joy Stick"
may be needed to operate more than than the number of memorized presets available from your DVR.
5
6
OFF
OFF
OFF
ON
ON
OFF
ON
ON
#7
#8
Position
Position
OFF
OFF
OFF
ON
ON
OFF
ON
ON
1200 bps
2400 bps
4800 bps
9600 bps
Camera Zoom Module
SONY Zoom Module
CNB Zoom Module
HITACHI Zoom Module
LG Zoom Module
7
Advertisement
Table of Contents
