Polaris RANGER XP 900 Owner's Manual page 58

Maintenance and safety
Hide thumbs Also See for RANGER XP 900:
Table of Contents

Advertisement

MAINTENANCE
Gearcases
Front Gearcase
Always check and change the front gearcase oil at the intervals outlined in the Periodic
Maintenance Chart beginning on page 47. Maintain the oil level even with the bottom thread
of the fill plug hole.
Refer to the Gearcase Specifications Chart on page 53 for recommended lubricants, capaci-
ties and torque specifications. See page 78 for the part numbers of POLARIS products.
Oil Check
The front gearcase fill plug is located on the right
side of the front gearcase.
1. Position the vehicle on a level surface.
2. Place the transmission in PARK.
3. Remove the fill plug. Check the oil level.
4. Add the recommended oil as needed.
5. Reinstall the fill plug. Torque to specification.
Oil Change
1. Support the vehicle securely with a jackstand.
2. Remove the fill plug.
3. Place a drain pan under the drain plug.
4. Remove the drain plug. Allow the oil to drain
completely.
5. Clean and reinstall the drain plug. Torque to
specification.
6. Add the recommended oil.
7. Reinstall the fill plug. Torque to specification.
8. Check for leaks. Dispose of used oil properly.
54
Fill
Plug
Fill
Level
Recessed
Drain Plug

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2013 ranger xp 900

Table of Contents