Operation - Oregon Scientific IBM80002 User Manual

OPERATION

TURN MASSAGER ON
1. Plug adapter into socket and connect to power cord.
'OF' on LCD Screen indicates massager is in standby mode.
NOTE • Make sure the adapter is not obstructed and is easily
accessible to the personal massager.
• To completely disconnect from power, the adapter should be
disconnected from the power cord by pulling it out while holding
the plug. Do not disconnect with wet hands or yank cord out.
• The personal massager and adapter should not be exposed
to wet conditions. No objects filled with liquid, such as vases,
should be placed on the personal massager and adapter.
START MASSAGE
1. Position affected body area to be treated against the i-comfort.
NOTE • Adjustable straps provided can be used to affix massager to
seat.
2. Press <
there are 15 minutes remaining.
CUSTOMISE MASSAGE
1. Press <
indicates clockwise, 'C2' indicates anticlockwise).
2. Press <
indicates normal, 'P2' indicates medium, 'P3' indicates strong).
>. '15' indicates massage has begun and
> / < > to select desired massage direction ('C1'
> / < > to select desired massage intensity ('P1'
4