Progressive; Reset; Store; When Input Video Signal To The Projector, These - Panasonic PT-CW230E Operating Instructions Manual

Image adjust

Progressive

1 ) Press ▲▼ to select [Progressive].
2 ) Press the <SELECT> button to display
the dialog box.
3 ) Press ◄► to select the desired item.
An interlaced video signal can be displayed in
z
progressive mode. Select one of the following
options.
Off Disabled
L 1 For an active picture
L 2 For a still picture
Film For watching a film
Note
When input video signal to the projector, [Progressive]
z
will become available.
[Progressive] cannot be selected when [480p],
z
[576p],
[720p] or [1 080p]
[Film] cannot be selected when [1 080i] is selected.
z
[Progressive] cannot be selected when [On] or
z
[NVIDIA 3D VISION] is selected in [3D] of [3D
setting].

Reset

To reset the adjusted data, all adjustments will return
to their previous figures.
1 ) Press ▲▼ to select [Reset].
2 ) Press the <SELECT> button.
A confirmation box appears and then select [Yes].
z

Store

1 ) Press ▲▼ to select [Store].
2 ) Press ► or the <SELECT> button.
3 ) Press ▲▼ to select one from Image 1
to 4 and press the <SELECT> button.
A confirmation box appears and then select [Yes].
z
46
- ENGLISH
is selected.