Connecting The Therapy Device - Philips respironics User Manual

Connecting the Therapy Device

1. When using a humidifier, the patient circuit attaches to the air outlet port on the humidifier.
2. To connect the therapy device to the humidifier, first you must remove the side cover on the therapy device. Press
in the tab on the side cover and pull the cover away from the unit.
3. Next, line up the components side by side. Make sure that the guides on the humidifier fit into the slots on the
therapy device and the air outlet port on the therapy device fits into the air inlet port on the humidifier.
4. Simply press the two units together until they snap into place. Make sure that the therapy device and the humidifier
are completely seated against each other.
4
Side Cover
Therapy Device
Tab