Team Losi Micro-HIGHroller Operation Manual
Team Losi Micro-HIGHroller Operation Manual

Team Losi Micro-HIGHroller Operation Manual

1/36-scale electric ready-to-run lifted truck

Advertisement

Quick Links

1/36-SCALE ELECTRIC READY-TO-RUN LIFTED TRUCK
Introduction
Thank you for choosing the Micro-HIGHroller. This guide contains the basic instructions
for operating your new Micro-HIGHroller. While the Micro-HIGHroller is great for first-
time RC drivers, it does require some mechanical experience and parental supervision for
drivers under 14 years of age. It is critical that you read all of the instructions and all
accompanying printed material in order to operate your model correctly and avoid
unnecessary damage. Please take a moment to look them over before running your
model.
DO NOT RUN YOUR MICRO-HIGHroller ON PLUSH CARPET, GRASS OR SAND
Warning
Although the best materials and components are used, and due to the size of this model, using anything
other than genuine Losi replacement and performance parts specifically designed for the Losi Micro-
HIGHroller could cause damage.
Register your product online so we can notify you about the latest option parts, product updates, tech
tips, service bulletins and more. Visit WWW.LOSI.COM and follow the Product Registration link to stay
connected.
For registering your Losi Product you will be automatically entered for a chance to win the Losi Pick Your
Prize Sweepstakes. The winner will be allowed to select a total prize package of $1,000 (retail value)
based on their preference
Operations Guide
CONNECT - REGISTER - WIN
WWW.LOSI.COM
c
2009 Losi, A Division of Horizon Hobby Inc.
1
.
Printed 07/09

Advertisement

Table of Contents
loading

Summary of Contents for Team Losi Micro-HIGHroller

  • Page 1 Visit WWW.LOSI.COM and follow the Product Registration link to stay connected. For registering your Losi Product you will be automatically entered for a chance to win the Losi Pick Your Prize Sweepstakes. The winner will be allowed to select a total prize package of $1,000 (retail value) based on their preference WWW.LOSI.COM...
  • Page 2: Getting Started

    If not, please check for low or incorrectly installed batteries. 5. Once the transmitter has been turned on, turn on the Losi Micro-HIGHroller by sliding the switch to the “On” position (located on the bottom of the chassis). If the rear wheels turn, adjust the “TH.
  • Page 3: Safety Precautions

    • Losi Nutdriver: 4.5mm - LOSA99160 • Small flat blade screwdriver Note: Use only Losi or other high-quality tools. Use of inexpensive tools can cause damage to the small screws and parts used on this type of model. The Transmitter Steering Wheel: Controls direction (left/right) of the model.
  • Page 4: Making Adjustments

    The Micro radio is equipped with changeable crystals that allow you to change the frequency/channel you operate on. This is especially useful when you want to run a group of Losi Micro’s at the same time. When changing crystals/channels, you must always replace the crystals as a set with one going in both the transmitter and the receiver in the truck.
  • Page 5 This is really helpful when you are on slick as well as high-traction surfaces. If your Micro-HIGHroller turns too sharply and/or spins out easily, try turning the steering rate down by rotating the knob counterclockwise (to the left). For sharper or additional steering, try turning the knob clockwise (to the right).
  • Page 6 The pinion that is on the Micro-HIGHroller offers the best balance of both. To change the pinion, remove the gear cover, loosen the motor screws and slide the motor back. Use a small flat head screwdriver between the motor plate and pinion gear to push the gear off.
  • Page 7: Replacing The Steering Servo

    Replacing the Steering Servo 1. Unplug all wires, remove receiver crystal and 4 screws pictured in Figure 1. (Be sure to note the locations of all screws and sizes.) 2. Remove the 2 screws pictured in Figure 2, and place the PC board to the side. 3.
  • Page 8 SERVICE/REPAIR If you have any problems other than those covered in the troubleshooting section of this operation guide, please call the Horizon Hobby Product Support line at 1-877-504-0233. They will be able to give you specific additional attention and instruct you as to what needs to be done. Horizon Hobby Customer Service 4105 Fieldstone Rd.
  • Page 9 Safety Precautions This is a sophisticated hobby Product and not a toy. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the Product or other property. This Product is not intended for use by children without direct adult supervision.
  • Page 10: Instructions For Disposal Of Weee By Users In The European Union

    United Kingdom Electronics and engines requiring inspection or repair should be shipped to the following address: Horizon Hobby UK Units 1-4 Ployters Rd Staple Tye, Harlow Essex CM18 7NS United Kingdom Please call +44 (0) 1279 641 097 or email us at sales@horizonhobby.co.uk with any ques- tions or concerns regarding this product or warranty.
  • Page 11: Declaration Of Conformity

    Declaration of Conformity (in accordance with ISO/IEC 17050-1) No. HH20090816 Product(s): LOS 1/36 Micro-HIGHroller Item Number(s): LOSB0237 Equipment class: The object of declaration described above is in conformity with the requirements of the specifications listed below, following the provisions of the European R&TTE directive 1999/5/EC:...
  • Page 12 WWW.LOSI.COM Horizon Hobby, Inc. 4105 Fieldstone Road Champaign, IL 61822...

Table of Contents