LG BR629T Owner's Manual page 64

64
Useful Functions
Category Menus / Options
Clock Clock Setting
0 1 / 0 8 / 2 0 1 2 ( WED )
Press [ENTER].
Auto Clock
Setting
Time Zone
Network Network
Settings Connection
BD-Live
Setting
Displaying network status
Media Share On
Others Auto
Standby
Panel
Display
TV screen
protection
Clock Setting
1 5 : 0 0
On
Off
NSW/ACT WA
VIC TAS
QLD NT
SA
Auto
Manual IP Address Auto(DHCP) Sets the IP address. In most cases, you can connect to the Internet
Setting
Manual
IP Address
Subnet Mask
Default Gateway
DNS Auto(DHCP) Sets the DNS setting. In most cases, you can connect to the Internet
Setting
Manual
Primary DNS
Secondary DNS
Proxy Use
Setting
Do Not Use
Connection Auto
Speed
10BASE
Half
10BASE
Full
100BASE
Half
100BASE
Full
Connection Test
Allow
Limited Allow
Prohibit
Off
On
Off
On
Off
Power Interlock
On
Off
Press [ ENTER] so that the entry fields will be available. Enter
the date (day / month / year) and time using
[ ENTER].
[ / ]
• Use to go back and forth among the fields.
• Your clock setting will be lost if either there is a power failure or
the unit is unplugged for more than 30 seconds.
• If "Auto Clock Setting" is set to "On" you cannot select "Clock
Setting".
Allows the unit to adjust the clock automatically by referring to the
DTV time signal.
• Make sure "Initial Setting" or "Auto Tuning" is completed.
(Refer to page 16)
• Auto clock adjustment will be performed at the following time.
• NSW/ACT (3:00), VIC (3:00), TAS (3:00), QLD (2:00), SA (2:30),
NT (1:30), WA (1:00)
Sets the region where you live.
without making any changes to the default setting.
without making any changes to the default setting.
Sets the proxy server. In most cases, you can connect to the Internet
without using proxy server.
Sets the connection speed. In most cases, you can connect to the
Internet without making any changes to the default setting.
Perform a network connection test. After you change the IP address
or DNS setting, always perform this test.
You can restrict Internet access when BD-Live™ functions are used.
You can confirm "MAC Address", "Connected server",
"IP Address", "Subnet Mask", "Default Gateway", "Primary DNS",
"Secondary DNS", "Proxy Setting", "Proxy Port" and
"Connection Speed".
By setting this to "On", you can use this unit as a home media server
and your DLNA compatible devices / players can access the contents
stored on this unit's HDD / USB-HDD.
• When this setting is "On", "Standby settings" will be set to
"Normal Standby" automatically.
Setting this to "On" places the unit in standby mode automatically if
the unit remains inactive for more than 3 hours.
"On": Always on.
"Off": Always off.
"Power Interlock": When the unit is on, the display panel is on,
when the unit is off, the display panel is off.
If the unit has been inactive for more than 15 minutes while displaying
the home menu screen / setting screen, the screen will automatically
be turned to the DTV screen. If the track list for Audio CD / DivX
MP3 / WMA / contents list for JPEG files has been displayed, screen
saver will start.
[ / ]
, then press
®
/