Stopping The Timer Recording In Process; Additional Information About Recording - LG BR629T Owner's Manual

38
Recording
Cancelling a timer programme from the
"Timer Programming" screen
1. To cancel one timer programme
1) Press [TIMER REC.] to call up the
"Timer Programming" screen.
2) Use [ /
cancel, then press [SUB MENU].
3) Use [ /
[ ENTER].
To cancel multiple timer programmes
4) Press [TIMER REC.] to call up the
"Timer Programming" screen.
5) Press [SUB MENU] to call up the sub menu.
6) Use [ /
press [ ENTER].
7) Use [ /
cancel, then press [
" " will be displayed next to the selected timer
programmes.
8) Press [ ] to select "OK", then press [
2. Use [ / ] to select "Yes" in the
confirmation message window, then press
[ ENTER].
3. Press [ BACK] to finish.
Stopping the timer recording in
process
1. If chase play or simultaneous rec/play
is being performed, press [ ] to stop it
beforehand.
2. Press [ ] to stop the recording.
3. Use [ / ] to select "Yes" in the
confirmation message window, then press
[ ENTER].
• The recording (from the beginning to where it was
stopped) will be one title. (It may take a moment to
accept next operation.)
• To stop a dual recording
Switch to the recording channel, then press [
] to select the timer programme to
] to select "Delete", then press
] to select "Delete multi prog.", then
] to select the timer programmes to
ENTER].
Additional Information
about Recording
Overall recording
• Recording will automatically stop in case the HDD / disc
becomes full.
Overall timer recording
When a timer recording is set
• " " appears on the display of the unit.
Right before the timer recording
• If the unit is powered off, it will automatically be turned
on 2 minutes before a timer recording starts.
After a timer recording
• The recording will automatically stop.
Alternate recording
When a timer recording cannot be performed for the
ENTER].
following reasons, the unit will record to the HDD (if
possible), then notify on the "Timer Programming" screen.
• If the disc is not recordable or there is no disc in the unit.
• If the BD-RE/-R disc or the USB-HDD does not have
enough capacity for the recording.
• If a recordable USB-HDD is not connected to the unit.
When a normal recording / instant timer recording /
dubbing and a timer recording overlap
In the following cases, a normal recording / instant timer
recording will be cancelled 2 minutes before the timer
recording.
• When a dual recording is already being performed
• When a dual recording cannot be performed
For normal-speed dubbing, it will be cancelled 2 minutes
before a timer recording starts.
When timer programmes overlap
A confirmation message will be displayed
when the last timer recording is set.
• Confirm the message, then press [
"Timer Programming" screen will be displayed. If there
is a programme which will not be recorded or partially
recorded due to overlapping, "
programme will be shown in light blue.
].
To confirm overlapping timer recordings
• Press [TIMER REC.] to call up "Timer Programming"
screen. If there is a programme which will not be
recorded or partially recorded due to overlapping,
" " will appear and the programme will be shown in
light blue.
ENTER].
" will appear and the