Wireless Lan; Wlan Connections - Nokia E63 User Manual

When you activate the remote SIM access profile, you can
use applications on your device that do not need network
or SIM services.
To make connections between your device and the car kit
without separate acceptance or authorisation, select
Menu Connectivity
>
paired devices tab. Scroll to the car kit, press the scroll key,
and enter the Bluetooth passcode. When the device asks
to make the connection automatic, select Yes. If you select
No, connection requests from this car kit must be
accepted separately every time.
To end the remote SIM access connection from your
device, select Menu Connectivity
>
Remote SIM mode > Off.

Wireless LAN

Your device can detect and connect to a wireless local area
network (WLAN). To use WLAN, a network must be
available in the location and your device must be
connected to it.

WLAN connections

Important: Always enable one of the available
encryption methods to increase the security of your
wireless LAN connection. Using encryption reduces the
risk of unauthorised access to your data.
106
> Bluetooth, and open the
Bluetooth
>
To use WLAN, you must create an internet access point in
a WLAN. Use the access point for applications that need to
connect to the internet. A WLAN connection is established
when you create a data connection using a WLAN access
point. The active WLAN connection is ended when you end
the data connection. You can also end the connection
manually. See "Connection manager", p. 108.
You can use WLAN during a voice call or when packet data
is active. You can only be connected to one WLAN access
point device at a time, but several applications can use the
same internet access point.
When the device is in the Offline profile, you can still use
WLAN, if available. Remember to comply with any
>
applicable safety requirements when establishing and
using a WLAN connection.
If you move the device to another location within the
WLAN and out of range of a WLAN access point, the
roaming functionality can automatically connect your
device to another access point that belongs to the same
WLAN. As long as you remain within range of access points
that belong to the same network, your device can stay
connected to the network.
Tip: To check the unique media access control (MAC)
address that identifies your device, for example to
configure the MAC address of your device to a WLAN
router, enter *#62209526# on the device keypad.
The MAC address is shown on the device display.
© 2008 Nokia. All rights reserved.