Nokia E63 User Manual page 142

Q: How do I switch WLAN off on my Nokia
device?
A: The WLAN on your Nokia device switches off when you
are not trying to connect, not connected to another access
point, or not scanning for available networks. To further
reduce battery consumption, you can specify that your
Nokia device does not scan, or scans less often, for
available networks in the background. WLAN switches off
in between background scans.
To stop the background scans, select
Settings Connection
>
availability > Never. You can still manually scan for
available WLAN networks and connect to WLAN networks
as usual.
To increase the background scan interval, select
WLAN availability > Yes, and define the interval in
for networks.
Q: Why can't I browse the web even though the
WLAN connection is working and the IP settings
are correct?
A: Check that you have defined the HTTP/ HTTPS proxy
settings correctly in the advanced settings of your WLAN
access point.
Q: How do I check the signal quality of my WLAN
connection?
Select Menu Connectivity
>
data connections Options
>
quality is weak or moderate, you may encounter
connection problems. Try again closer to the access point.
© 2008 Nokia. All rights reserved.
Menu Tools
>
Wireless LAN Show WLAN
> >
Show
Conn. mgr. Active
> >
> Details. If the signal
Q: Why do I have problems with the security
mode?
A: Check that you have configured the security mode
correctly, and that it is the same that the network uses.
To check the security mode the network uses, select
Menu Connectivity
>
connections
>
Check also the following: you have the correct WPA mode
(preshared key or EAP), you have disabled all EAP types
that are not needed, and all the EAP type settings are
>
correct (passwords, user names, certificates).
Q: Why can't I select a contact for my message?
A: The contact card does not have a phone number, an
address, or an e-mail address. Select
Communic. > Contacts, and edit the contact card.
Scan
Q: The note Retrieving message is shown
briefly. What is happening?
A: The device is trying to retrieve a multimedia message
from the multimedia messaging centre. This note is
shown if you have selected
Messaging Options
>
message Multimedia retrieval
>
automatic. Check that the settings for multimedia
messaging are defined correctly and that there are no
mistakes in phone numbers or addresses.
message settings", p. 61.
Conn. mgr.
> >
Options > Details.
Menu
Menu Communic.
>
Settings Multimedia
> >
Always
>
Active data
>
>
See "Multimedia
141