Installing Batteries In The Remote Control; Handling The Batteries; Handling The Remote Control; Remote Control Operation Range - Cello C32227DVBIPTVT2-LED User Manual

Installing Batteries in the Remote Control

1. Press and lift the back cover to open the battery compartment of the
remote control.
2. Insert two AA size batteries. Make sure to match the (+) and ( - ) ends
of the batteries with the (+) and ( - ) ends indicated in the battery
compartment.
3. Close the battery compartment cover.

Handling the Batteries

Improper or incorrect use of batteries may cause
corrosion or battery leakage, which could cause
fire, personal injury or damage to property.
Only use the battery type indicated in this manual.
When the batteries are exhausted, the remote will
not function. Replace both batteries at the same
time with new ones.
Do not install new batteries with used ones and do
not mix different types of batteries.
Do not dispose of used batteries as domestic
waste. Dispose of them in accordance with local
regulations.

Remote Control Operation Range

Point the remote control at the TV no more than 5 metres from the remote control
sensor on the TV and within 60° in front of the TV. The operating distance may vary
depending on the brightness of the room.

Handling the Remote Control

Take care of your fingernails when you press and
hold the battery release tab.
Do not drop or cause impact to the remote control.
Do not spill water or any liquid on the remote
control.
Do not place the remote control on a wet object.
Do not place the remote control under direct
sunlight or near sources of excessive heat.
Remove the battery from the remote control
when not in use for a long period of time, as it
could cause corrosion or battery leakage and may
result in physical injury and/or property damage
including fire.
30°
5M
30°