Specifications - Philips FW-C355 Service Manual

Hide thumbs Also See for FW-C355:
Table of Contents

Advertisement

SPECIFICATIONS

GENERAL:
Mains voltage : 110-127V/220-240V Switchable for /21
220-230V for /22/34
Mains frequency
: 50/60Hz
Power consumption : < 70W Active
< 15W at Standby with Clock on
< 0.5W at ECO Standby /22
Clock accuracy
: < 4 seconds per day
Dimension centre unit : 265 x 310 x 365mm
TUNER:
FM
Tuning range
Grid
IF frequency
Aerial input
Sensitivity at 26dB S/N
Selectivity at 600kHz bandwidth
IF rejection
Image rejection
Distortion at RF=1mV, dev. 75kHz
-3dB Limiting point
Crosstalk at RF=1mV, dev. 40kHz
MW
Tuning range
Grid
IF frequency
Aerial input
Sensitivity at 26dB S/N
Selectivity at 18kHz bandwidth
IF rejection
Image rejection
Distortion at RF=50mV, m=80%
AMPLIFIER:
Output power
Frequency response within -3dB
Dynamic Bass Boost
: DBB ON, DBB 1, DBB 2, DBB 3
Digital Sound Control
: Jazz, Techno, Optimal, Rock
Headphone output, R
= 32Ω
LOAD
Input sensitivity, R
= 600Ω
S
Aux / CDR : 500mV / 1.0V
: 87.5-108MHz
: 50kHz
100kHz for /21
: 10.7MHz ± 20kHz
: 75Ω coaxial
: < 7µV
: > 25dB
: > 60dB [80dB]
: > 25dB [75dB]
: < 3%
: < 8µV
: > 18dB
: 531-1602kHz
530-1700kHz for /21
: 9kHz
10kHz for /21
: 450kHz ± 1kHz
: Frame aerial
: < 4.4mV/M [4.0mV/M]
: > 18dB
: > 45dB
: > 28dB
: < 5%
: 2 x 40W
RMS
1)
: 50Hz-15kHz
3)
: 15mW ± 2dB
Mic : {3.5mV}
1-3
CASSETTE RECORDER:
Number of track
Tape speed
Wow and flutter
Fast-wind/rewind time C60
Bias system
Rec/Pb frequency response within 8dB
Signal to noise ratio
COMPACT DISC:
Measurement done at output conn. of the CDC module.
Frequency response within ± 1.5dB : 20Hz - 20kHz
Output level (in Vrms)
Signal/Noise ratio (A-weighted)
Distortion at 1kHz
Channel unbalance at 1kHz
Channel separation at 1kHz
De-emphasis
{....} Values for /21/21M only
[....]
Values for Cenelec Tuner only
6Ω, 1kHz, 10% THD
1)
Frequency response in each setting is software controlled.
2)
3)
: 2 x 2 stereo
: 4.76 cm/sec +2.5/-1.5%
: < 0.4% DIN
: 130 sec
: 78kHz ± 10kHz
: 80Hz - 12.5kHz
Type I : > 48dBA
: 500mV ± 1dB, R
out
: > 80dBA
: < 0.003%
: ±1dB
: > 60dB
: 0 or 15/50 mS (Switched by subcode
on the disc)
= 100Ω

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents