Panasonic CS-PE9CKE Operating Instructions Manual page 6

Basic Operation
Setting the Vertical Airflow Direction
Panasonic
FAN
AUTO SPEED
HEAT AIR
SWING
COOL
DRY
A B
OFF/ON TEMP
MODE
A B
FAN SPEED
TIMER
AIR SWING
SELECT SET/CANCEL
ERROR RESET RESET
Manual Airflow Direction
Press AIR SWING button to select manual airflow direction.
5 stages can be obtained.
Heat: When the outlet air temperature is low, the vertical
airflow louvers will position a horizontal level and will be at
a downward position as the temperature increases.
Notes:
Ensure that the angles of the vertical airflow direction louvers are
adjusted by using the remote control. If it were manually adjusted,
the proper mechanism of the louvers may be affected. If such a case,
turn off the air conditioner temporarily and then restart the operation.
5
Auto Airflow Direction
Press AIR SWING button to select auto airflow direction.
Cool/Dry: The vertical airflow louvers swing up and down to form a natural
breeze.
FAN
AUTO SPEED
HEAT AIR
SWING
COOL
DRY
A B
Heat: When the outlet air temperature is low, the vertical airflow louvers will
position a horizontal level and will be at a downward position as the
temperature increases.
When temperature is low.
When temperature rises.
AUTO
HEAT
COOL
DRY
A
FAN
SPEED
AIR
SWING
B
During Cooling and Soft Dry operations, please avoid
the vertical airflow direction louvers from positioning in a
downward direction for a long period. Otherwise, if
condensation occured near the airflow direction louver
and air outlet vents, it may result in water dripping.
After the air conditioner stopped and restarted
immediately, the compressor will not operate within
3 minutes. (For compressor protection purposes.)
Setting the Horizontal Airflow Direction
The Horizontal Airflow direction can be manually controlled.
To adjust the horizontal airflow direction, manually
move the Horizontal Airflow Direction Louver.