Table of Contents
Advertisement
Chapter 3, Preparing the devices
3.11 Accu-Chek Performa Combo/Performa Expert
10:02
2 Feb 09
bG Test
Bolus Advice
Pump
My Data
Settings
10:00
View Data
Add Data
Reports
Data Transfer
Menu
3-14
2 Feb 09
Data Transfer
Transferring Data
Data Transfer
Complete
The Accu-Chek Performa Combo/Performa Expert meter has
a built-in infrared port for data transfer. In order to read data
from these devices, proceed as follows:
•
Place the device no more than 10 cm away from the
infrared window on the Accu-Chek Smart Pix device.
Both infrared windows must be facing one another.
•
In the main menu, select My Data and press
•
Select Data Transfer and press
The data is now transferred. When data transfer has been
completed, the Complete display is shown for three seconds.
Then, the meter turns off.
If you use the Accu-Chek Performa Combo meter
i
together with an Accu-Chek Spirit Combo insulin
pump, you should always read data from both devices
at the same time in order to get information that is as
complete as possible (especially concerning bolus
quantities and basal rates).
.
Accu-Chek Smart Pix user's manual
.
Advertisement
Table of Contents
Need help?
Do you have a question about the Smart Pix and is the answer not in the manual?