Table of Contents
Advertisement
1.3
Overview of the Accu-Chek Smart Pix status indicator signals
Accu-Chek Smart Pix user's manual
The Accu-Chek Smart Pix system indicates various operating
states on the status indicator on top of the device. The
following signals can appear on this indicator:
7
7
Off:
The Accu-Chek Smart Pix device is not connected to
a computer, or the computer is not switched on.
8
Centre of status indicator
•
Lit continuously: report is ready on the computer,
8
idle state.
•
Flashing slowly: error
9
Top/bottom dots
•
Flashing simultaneously about once a second: device
is ready for operation and is actively searching for
meters or insulin pumps.
9
•
Flashing fast simultaneously: data transfer
10
Left/right dots
•
Flashing slowly simultaneously: processing report
data
Software updates for the Accu-Chek Smart Pix
10
system can be installed via the computer. While such
an update is being installed, the centre of the status
indicator 8 and (simultaneaously) the dots 9 and 10
flash alternately.
Chapter 1, Accu-Chek Smart Pix System overview
1-5
Advertisement
Table of Contents
Need help?
Do you have a question about the Smart Pix and is the answer not in the manual?