About Your New Remote Controller; Programming At A Glance; Efs—01 - Mitsubishi Electric MRCH1 Operating Manual

Operating Manual
About your remote controller
Your new remote controller is pre-programmed and ready to go. All you have to do is
set the time and day. Then check the settings below and change if needed:
1. Set time and day (required for proper operation)
2. Select fan setting
3. Select system setting
4. Program schedules:
while space is occupied (assumes arrival at 8 am
and departure at 10 pm) ................................................................ See pages 10-11
ONE TOUCH TEMP CONTROL: You can override the program schedule at any time,
and manually adjust the temperature (see pages 13-16).
69-2427EFS—01
................................................................................. See page 6
.......................................................................... See page 7
Preset to energy-saving levels
.......................... See page 5
2