Mitsubishi Electric MRCH1 Operating Manual page 23

Remote Controller additional features (continued)
To set up/down airflow direction
(vane control)
If you would like to manually set the airflow
direction, press MORE, then
desired position, "Auto" or "Oscillate."
Note: "Auto" position is determined by the system equipment to provide maxi-
mum efficiency and comfort. Top and bottom positions may change after 1 hour to
prevent condensation.
Note: Airflow direction positions may vary depending on your equipment.
Français : voir la page 34 • Español: vea la página 68
or to select the
s t
21
Set Airflow Direction
Done
Ceiling
Floor
M32305
69-2427EFS—01