Regza-Link Connection - Toshiba XV50* ANALOGU Series Manual

SETTING UP

REGZA-LINK connection

You can control the basic functions of connected audio/video devices using the televisions remote control
if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and
operations, see pages 29–30.
AV amplifier
AUDIO
VIDEO L R HDMI
IN
OUT
L R
Playback device
AUDIO
VIDEO
L R
IN
OUT
L R
For the setup shown above, you will need three HDMI cables
(see page 9).
NOTE:
• If several devices are connected, the REGZA-LINK feature
may not operate properly.
• For proper operation, it is recommended that you use HDMI
cables with the HDMI Logo (
• The HDMI3 terminal is located at the side of the television.
IN
HDMI OUT
HDMI OUT
)
Playback device
Before controlling the device(s):
• After completing the above connections, set the REGZA-LINK
menu as you desire (see page 29).
• The connected devices must also be set. For details, see the
operation manual for each device.
• The REGZA-LINK feature uses CEC technology as regulated
by the HDMI standard.
• This feature is limited to models incorporating Toshiba's
REGZA-LINK. However, Toshiba is not liable for those
operations. Refer to individual instruction manuals for
compatibility information.
10
AUDIO
HDMI OUT
VIDEO L R
IN
OUT
L R