Specifications; Overview; Environmental; Electrical - Geist ZP Series Instruction Manual

Specifications

Overview

The ZP Series products are Power Distribution Units (PDU) intended for connection to a 50-120
Amp AC Mains circuit. The PDUs are designed to be powered by either a single phase or a
three phase AC input circuit. Three phase units are configured for a delta input connection. ZP
Series PDUs can optionally be configured with a Geist Current Meter that provides local
monitoring and display of each output circuit current.
configured with a Geist Current Monitoring (EM) Meter that provides both local and remote
monitoring of input and output line current.

Environmental

Temperature
Operating:
Storage:
Humidity
Operating:
Storage:
Elevation
Operating:
Storage:

Electrical

See nameplate for unit ratings.

Receptacle Ratings

NEMA 5-15R or L5-15R
NEMA 5-20R or L5-20R
NEMA 6-20R or L6-20R
NEMA L15-20R
NEMA L15-30R
IEC-320 C13
IEC-320 C19

Networking (For Current Monitoring (EM) Meter Units Only)

Protocols
HTTP, ICMP, DHCP, TCP/IP, FTP
Ethernet Link Speed
10 Mbit; half-duplex
GM1099.doc
10°C (50°F) min
-25°C (-13°F) min
5% min 95% max
5% min 95% max
0 m (0 ft) min
0 m (0 ft) min
125 Volts, 15 Amp
125 Volts, 20 Amp
250 Volts, 20 Amp
250 Volts 3~, 20 Amp
250 Volts 3~, 30 Amp
125/250 Volt, 15 Amp (per Receptacle Bank)
125/250 Volt, 20 Amp
Alternatively, ZP Series PDUs can be
45°C (113°F) max
65°C (149°F) max
(non-condensing)
(non-condensing)
2000 m (6561 ft) max
15240 m (50000 ft) max
3 Revision Date: 1/25/2011