Temperature; Projector And Backlight; Colour - Oregon Scientific BAR339P User Manual

TEMPERATURE

To toggle temperature unit:
Press °C / °F.
To toggle between outdoor / indoor sensor readings:
Touch TEMP. / indicates indoor and outdoor
temperature.
To auto-scan between sensors:
Touch and hold TEMP for 2 seconds to display the
sensor's data for 5 seconds.
To deactivate auto-scan function touch TEMP.
To toggle between current, minimum and maximum
temperature records for outdoor / indoor:
Press MEM repeatedly.
To clear the records:
Press and hold MEM for 2 seconds.

PROJECTOR AND BACKLIGHT

To activate Projection function:
• Slide PROJECTON switch to ON to illuminate
projection continuously.
To activate Backlight function:
• Slide LIGHT switch to ON to illuminate backlight
continuously.
OR
• Touch SNOOZE to turn on projector and backlight
for 5 seconds.
BAR339P_M_EN_R1.indd 6
• Touch repeatedly to fl ip dual line projection image
by 180 degrees.
NOTE If projection is illuminated, do not look directly
into the projector.
NOTE To save battery life, the projector and backlight
will only operate continuously when adapter is installed.
The light sensor will turn off the projector automatically
when it detects external light sources.

COLOUR

The colour function lights up the LCD screen. There are
2 different types of display:
• WEATHER FORECAST: The colour changes
according to the different weather forecast. (As
shown in Weather forecast).
• DEMO: The colour gradually changes between the
colours (rainbow display).
6
6/21/07 2:08:08 PM