Jeep Liberty 2010 Owner's Manual page 110

cellular phone. Press the
call on hold and answer the incoming call.
NOTE: The uconnect™ phone compatible phones in the
market today do not support rejecting an incoming call
when another call is in progress. Therefore, the user can
only answer an incoming call or ignore it.
Making a Second Call While Current Call is in
Progress
To make a second call while you are currently on a call,
press the button and say Dial or Call followed by
the phone number or phonebook entry you wish to call.
The first call will be on hold while the second call is in
progress. To go back to the first call, refer to Toggling
Between Calls in this section. To combine two calls, refer
to Conference Call in this section.
button to place the current
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109
Place/Retrieve a Call From Hold
To put a call on hold, press the
a single beep. This indicates that the call is on hold. To
bring the call back from hold, press and hold the
button until you hear a single beep.
Toggling Between Calls
If two calls are in progress (one active and one on hold),
press the button until you hear a single beep,
indicating that the active and hold status of the two calls
have switched. Only one call can be placed on hold at a
time.
Conference Call
When two calls are in progress (one active and one on
hold), press and hold the
double beep indicating that the two calls have been
joined into one conference call.
button until you hear
button until you hear a
3