Do you have a question about the 30518 and is the answer not in the manual?
Questions and answers
Louisa Carns Ellis
March 1, 2025
How do I reset needle plate
1 comments:
Mr. Anderson
May 14, 2025
The context does not mention part number 30518 specifically, but to reset the needle plate on a Singer sewing machine as described:
1. Remove the needle plate by lifting it off. 2. Clean the exposed area with a lint brush. 3. To reset, place the needle plate back in position over the feed dogs. 4. Ensure it sits flat and aligns with screw holes if screws are used.
If needed, press the feed cover tabs into the holes on the needle plate.
Need help?
Do you have a question about the 30518 and is the answer not in the manual?
Questions and answers
How do I reset needle plate
The context does not mention part number 30518 specifically, but to reset the needle plate on a Singer sewing machine as described:
1. Remove the needle plate by lifting it off.
2. Clean the exposed area with a lint brush.
3. To reset, place the needle plate back in position over the feed dogs.
4. Ensure it sits flat and aligns with screw holes if screws are used.
If needed, press the feed cover tabs into the holes on the needle plate.
This answer is automatically generated