Ink Ribbon, Retransfer Film, and Laminator Material
Use the following sections to order replacement ink ribbon, retransfer film, and laminator film
cartridges. Choose materials suitable for your printing and laminating purposes.
Ink Ribbon
Color print ribbons are designed for full‐color card printing. The ribbons use the following color
panels: Y=yellow, M=magenta, C=cyan, and K=black.
The following ink ribbons are available:
Type
YMCK
YMCK‐K
YMCK‐PO
(YMCKi)
YMCK‐UV
Retransfer Film
The following InTM retransfer film is available:
568971‐103 (Prints up to 1,000 single‐sided cards.)
Laminator Material
Datacard provides two types of materials for use in laminators:
Topcoat, which is a continuous film.
Patch, which has die‐cut patches sized to fit on a card.
The LM200 & LM300 laminator can apply any of the following types of laminator supply
materials:
106
Part Number
Panel Sets/Roll
568971‐001
1,000
568971‐002
750
568971‐004
750
568971‐005
750
Purpose
Full color and black (K) on one side or
full color and black (K) on both sides.
Full color and black (K) on one side and
black (K) only on the other side.
Full color with a non‐printing (peel‐off)
area for magnetic stripe on one side or
on both sides.
Full color and black (K) with UV printing
on one side or on both sides.
Supplies