Table of Contents
Advertisement
Do not place the projector where it might
be exposed to dust.
- This may cause a fire hazard !
Only use the projector on a level and sta-
ble surface.
- It may become unstable and affect operation.
Don't clog the vents(air intake/exhaust) of
the projector.
This would cause the internal temperature to
increase and could cause a fire hazard!
Air intake
Do not use the projector in a damp place
such as a bathroom where it is likely to get
wet.
- This may cause a fire or an
electric shock hazard !
Indoor Installation-NOTES
R
R
exhaust pipe
Outdoor Installation-WARNING
R
When installing the projector on a table, be
careful not to place it near the edge.
- This may cause the projector to fall
causing serious injury to a child
or adult and serious damage
to the projector.
- Only use a suitable stand.
Ensure good ventilation around the pro-
jector. The distance between the projector
and the wall should be more
than 30cm.
- An excessive increase
in its internal
temperature may
cause a fire hazard!
Do not place the projector directly on a
carpet, rug or place where ventilation is
restricted.
- This would cause its
internal temperature to
increase and might
create a fire hazard !
In case of using a receiver (VCR, Digital
Set Top Box), bend antenna cable
between inside and outside building to
prevent rain from flowing in.
- This may cause water
damaged inside the
projector and could
give an electric shock.
R
R
R
4
Advertisement
Table of Contents
