2 Installation
2-1 Before Installation
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
2-2 Unpacking the Unit
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact Raloy immediately.
2-3 Installation Instructions (Standalone KVM)
A
3
1
Step
■ Install each bracket using the screws provided.
B
Screw A: 2 pcs
M3.2 x 4.5 mm
2
Step
■ Mount the KVM into the rack.
Screw B: 8 pcs
M4 x 10 mm