3Com OfficeConnect 3CR858-91 User Manual page 31

Cable/dsl router
Hide thumbs Also See for OfficeConnect 3CR858-91:
Table of Contents

Advertisement

PPPoE Mode
Figure 15 PPPoE Interface Screen
To setup the Router for use with a PPP over Ethernet (PPPoE) connection,
do the following:
1 Enter your PPP over Ethernet user name in the User Name text box.
2 Enter your PPP over Ethernet password in the Password text box and
enter it again in the Retype Password text box.
3 If required, enter your PPP over Ethernet service name in the Service
Name text box. This is optional. Not all ISPs require a PPPoE service name.
Do not enter anything in this box if your ISP does not require a service
name.
4 Enter the MTU value supplied by your ISP in the MTU text box. If your ISP
has not supplied an MTU value, leave this at the default value. The
default is 1454.
5 Check all of your settings, and then click Next. The DNS screen displays
Refer to
"DNS"
on page
page
35.
Accessing the Wizard
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents