2
Part names
Fresh air intake unit
Air supply port
Cools / heats the fresh air and
sends it into the room with the
air supply flange.
Blow temp. sensor
Drain pan
7-EN
Air intake port
Intakes the fresh air
with the inlet flange.
Earth screw
It is included in the electrical control box.
3
Part names and functions of the remote
controller
Display section
All indicators are displayed in the display example below.
Actually, only the selected options will be displayed.
•
blinks on the display of the remote controller the first time the power
switch is turned on.
• The initial settings progress while
controller after
has disappeared.
NOTE
The LCD may temporarily be blurred due to static electricity.
1
2
3
4
5
6
16
1
SETTING indicator
Displayed when setting the timer or other
functions.
2
Operation mode indicator
Indicates the operation mode selected.
3
Error indicator
Displayed when the protective device activates or
an error occurs.
4
Time display
Indicates time concerning the timer.
(Indicates an error code when an error occurs)
5
Timer mode indicator
Displays the timer mode.
6
Filter indicator
Reminder to clean the air filter.
– 4 –
TEMP.
is blinking. Start to use the remote
TIMER SET
FAN
TIME
SAVE
FILTER
RESET
TEST
SET
CL
SWING/FIX
13
7
8
9
10
12
7
TEST run indicator
Displayed during test run.
Display
section
ON / OFF
Operation
MODE
section
VENT
UNIT LOUVER
14
15
11
EN
8-EN