Download Print this page
Sony KDL-19M4000 Quick Setup Manual

Sony KDL-19M4000 Quick Setup Manual

Hide thumbs Also See for KDL-19M4000:

Advertisement

Quick Links

KDL-19M4000
Quick Setup Guide
For further information, see the Operating Instruction Manual supplied with the TV.
Please retain this guide for your future reference.
Upgrade your signal to high-definition programming to view the same picture
quality at home as you've seen in the store. Contact your cable or satellite provider
for upgrading to high-definition TV for stunning detail and richer sound.
For Your Convenience
Please contact Sony directly if you have questions on the use of your television
after reading your Quick Setup Guide and Operating Instruction Manual.
Contact Sony Customer Support at:
http://www.sony.com/tvsupport
Or to speak with a support representative:
United States
1-800-222-SONY (7669)
Please Do Not Return the Product to the Store
©2008 Sony Corporation
Printed in China
A
Use this diagram if you have;
If your DVD player has an HDMI jack, use that
instead of the video connections shown here.
PC
Rear of TV
DVD Player
Downloaded from
ManualsNet.com
search engine
Canada
1-877-899-SONY (7669)
Cables Required
Splitter
Coaxial
DVD
PC
VCR
Composite
Player
Component
Audio
HD15-HD15
PC IN
COMPONENT IN
(1080i/720p/480p/480i)
IN
CABLE/ANTENNA
Y
RGB
SERVICE
P
VIDEO
B
ONLY
IN
1
P
AUDIO
R
IN
AUDIO OUT
AUDIO
L
AUDIO
DIGITAL
AUDIO OUT
R
(OPTICAL)
L(MONO)
AUDIO
Making Audio/Video Connections
3-297-702-11(1)
Your new TV includes various types of video inputs and two types of audio jacks; RCA type
and digital audio (optical). Use the outputs/inputs that are available on your components
that provide the best audio/video performances:
Connector type
Digital Audio Out
DIGITAL
AUDIO OUT
(OPTICAL)
(Optical)
Analog Audio
~
The connection diagrams shown below and on the reverse side are recommendations only; other
possible solutions may exist. Connections that include an AV receiver can often be complex, so check
your AV receiver's instruction manual for additional details.
~
See the "Cables Required" chart that appears with the diagram to determine which cables you'll need.
Depending on the components you plan to connect, you may need to purchase extra cables.
Running Initial Setup
1
Select the language for the OSD (on screen display).
2
Connect either cable or antenna to your TV(you can
connect both using an A-B RF switch). If you connect
cable, the TV will scan cable channels. A er this
scanning, you can search antenna channels as well.
~
If you have cable and antenna connection available, please
connect cable first.
~
If you are not using the VHF/UHF CABLE connection to
TV, you can cancel the Auto Program by selecting
Cancel.
3
Your TV will detect the type of signal connected and will
start scanning for the channels.
4
If the Initial Setup programming found cable channels,
you will be able to scan antenna channels as well.
Connect the antenna (using an A-B RF switch, not
supplied) and change the switch to antenna, then start
Auto Program to search antenna channels.
B
1
Use this diagram if you have;
3
Cable Box
1
or
1
2
Satellite Receiver
1
If your DVD player or satellite receiver has an
HDMI jack, use that instead of the video
connections shown here.
Cable
Splitter
DVD Player
VCR
Best Audio/Video
Performance
DVD
PC
AV Receiver
VCR
Player
PC
Rear and Left Side of TV
COMPONENT IN
PC IN
(1080i/720p/480p/480i)
IN
RGB
VIDEO
IN
1
AUDIO
IN
AUDIO
DIGITAL
AUDIO OUT
(OPTICAL)
L(MONO)
AUDIO
A / V
Connector type
HDMI (High-Definition
Multimedia Interface)
Component video
S VIDEO
Composite video
Initial Setup
Please select your language
English
Español
Français
Initial Setup
First please connect cable or antenna.
Allow 50+ minutes for completion.
Start auto program now?
OK
Cancel
Initial Setup
Analog Channels Found:
0
Digital Channels Found:
0
Searching...
Please wait. Allow 50+ minutes for completion.
Press
to cancel.
Cancel
Initial Setup
If you want to use air signals,
please connect antenna.
Allow 50+ minutes for completion.
OK
Cancel
Cables Required
Splitter
1
Coaxial
4
Composite
2
Component
1
Audio
3
HD15-HD15
1
Optical Audio 1
If you are not using a cable box or
satellite receiver, connect your cable to
the VCR's RF IN jack.
Cable
Splitter
CABLE/ANTENNA
Y
SERVICE
P
B
ONLY
P
R
AUDIO OUT
L
AUDIO
R
Cable Box or
Satellite Receiver
VCR
Continued 

Advertisement

loading

Summary of Contents for Sony KDL-19M4000

  • Page 1 Cancel For Your Convenience Cancel. Please contact Sony directly if you have questions on the use of your television Your TV will detect the type of signal connected and will Initial Setup after reading your Quick Setup Guide and Operating Instruction Manual.
  • Page 2 AUDIO AUDIO DIGITAL DIGITAL AUDIO OUT AUDIO OUT (OPTICAL) (OPTICAL) L(MONO) AUDIO L(MONO) AUDIO Cable Cable Box or Satellite Receiver HD Cable Box or DVD Player HD Satellite Receiver or HD DVR Sony Dream System Downloaded from ManualsNet.com search engine...