Advertisement
Thank you for purchasing the VSSI LCD
Cat Scale.The 8450 VSSI comes complete
with a one-piece platform and base with
handles.With a 9V DC adapter (included)
the scale can be used in a fixed location
or with a 9V battery (not included) as a
portable scale.
This manual will guide you through
installation, and operation of your scale.
Please read it thoroughly before attempt-
ing to operate this scale and keep it
handy for future reference.
PRECAUTIONS
Before using this instrument, read this
manual and pay special attention to all
"WARNING" symbols:
Unpacking
Before beginning installation of your
scale, make certain the instrument has
been received in good condition.When
removing the scale from its packing,
inspect it for signs of damage, such as
exterior dents and scratches. Keep the
carton and packing material for return
shipment if it should become necessary. It
is the responsibility of the purchaser to
file all claims for any damages or loss
incurred during transit.
1. Remove the scale from the shipping
carton and inspect it for any signs of
damage.
2. Plug-in the 9VDC adapter or install the
battery. Refer to the Power Supply
or Battery sections of this manual
for more instruction.
3. Place the scale on a flat level surface,
such as a table or bench.
4. The scale is now ready for use.
Installation
IMPORTANT
Power Supply
To apply power to the scale using a
9VDC, 100 mA power supply, insert the
plug from the power supply cable into
the power jack on the back of the scale
and then plug power supply into the
proper electrical outlet.The scale is now
ready for operation.
2
NOTE:
PLEASE SAVE ALL
PACKAGING
UNTIL CERTAIN
YOU ARE SATISFIED
WITH THE PRODUCT
ELECTRICAL
WARNING
DO NOT connect the
plug-in power supply to
the scale with a battery
installed in the scale.
Hide quick links:
Advertisement
