Installing/Replacing Batteries - Radio Shack 43-2002 Owner's Manual

Handsfree headset amplifier with pc switch
Table of Contents

Advertisement

43-2002.fm Page 5 Tuesday, June 29, 1999 7:16 AM
PREPARATION

INSTALLING/REPLACING BATTERIES

You need two AA batteries (not supplied) to power the Handsfree
Headset Amplifier. For the longest operation and best perfor-
mance, we recommend alkaline batteries, available at your local
RadioShack store.
Cautions:
• Use only fresh batteries of the required size and recommended
type.
• Do not mix old and new batteries or different types of batteries.
• Note: To use battery power, adapter cord should not be con-
nected to the unit even if there is no AC power.
Follow these steps to install batteries.
1. Remove the screw from the bottom of the control unit, then
slide off the battery compartment door in the direction of the
arrow.
2. Put two AA batteries into the compartment as indicated by the
polarity symbols (+ and –) marked inside.
5

Advertisement

Table of Contents
loading

Table of Contents