Additional Information; Care And Service; Replacing The Fuse - Radio Shack 32-2055 User Manual

250-watt stereo pa amplifier

Hide thumbs Also See for 32-2055:

Table of Contents

Additional Information

Keep the ampliﬁer dry. If it gets wet, wipe it dry immediately. Use and store

the ampliﬁer only in normal temperature environments. Handle the ampliﬁer

carefully; do not drop it. Keep the ampliﬁer away from dust and dirt, and wipe it

with a damp cloth occasionally to keep it looking new.

If your ampliﬁer is not performing as it should, take it to your local RadioShack

store for assistance. To locate your nearest RadioShack, use the store locator

feature at www.radioshack.com, or call 1-800-The Shack (1-800-843-7422) and

follow the menu options. Modifying or tampering with the ampliﬁer's internal

components can cause a malfunction and might invalidate its warranty.

If the ampliﬁer does not operate, you might need to replace the fuse with

another 7-amp, 250-volt fuse (not supplied).

Notes:

•

Let the ampliﬁer cool down and see if it starts again before you try

fuse replacement.

•

Do not use a fuse with a rating other than that speciﬁed here. Doing

so might damage your ampliﬁer.

1. Unplug the ampliﬁer from the AC outlet.

2. Turn the fuse holder cap counterclockwise then pull out the cap to remove

the fuse.

3. If the fuse is blown, replace it. Use only an identical fuse with the proper

rating. The fuse must be 7 amps.

4. Insert the fuse into the fuse holder's socket and press the fuse holder back

into the ampliﬁer. Turn the fuse holder's cap clockwise to tighten it.

Fuse Holder Cap

Table of Contents

Show Quick Links

Table of Contents