Universal Remote Control Automator URC-200 Owner's Manual page 8

Press the P-PRO button to select the
4
Pre-Programmed Method.
The display changes so that you can select which
Device button to setup.
Press a Page button to display the
other five Device names.
In this step you choose the name of the device
5
you'd like to setup. Use the cursor UP or DOWN
buttons to change the flashing name. When it is
correct, press the SELECT button.
UP
DOWN
For Example: I wanted to setup the TV Device button first,
so I pressed the cursor UP or DOWN until "TV" was
flashing in the display.
The bottom of the display will flash "FROM TABLE".
T h e A u t o m a t o r
6
P-PRO
Button
First
Five
Device
Names
SELECT