Voice Dialling; Options During A Call; Messaging; Text And Multimedia Messages - Nokia 6700 classic User Manual

16

Messaging

Voice dialling

Make a phone call by saying the name that
is saved in Contacts.
As voice commands are language-
dependent, before voice dialling, you
must select Menu
Language settings
and your language.
Note: Using voice tags may be difficult in
a noisy environment or during an
emergency, so you should not rely solely
upon voice dialling in all circumstances.
1 In the home screen mode, press and
hold the right selection key.A short
tone sounds, and
tone is displayed.
2 Say the name of the contact you want
to dial. If the voice recognition is
successful, a list with matches is
shown. The phone plays the voice
command of the first match on the
list. If it is not the correct command,
scroll to another entry.

Options during a call

Many of the options that you can use
during a call are network services. For
availability, contact your service provider.
During a call, select
appropriate option.
Settings Phone
> >
Phone language
>
Speak after the
Options and the
Messaging
You can read, write, send and save text
and multimedia messages, e-mail, audio
and flash messages. The messaging
services can only be used if they are
>
supported by your network or service
provider.

Text and multimedia messages

You can create a message and optionally
attach, for example, a picture. Your phone
automatically changes a text message to
a multimedia message when a file is
attached.
Text messages
Your device supports text messages
beyond the limit for a single message.
Longer messages are sent as two or more
messages. Your service provider may
charge accordingly. Characters with
accents, other marks, or some language
options take more space, and limit the
number of characters that can be sent in
a single message.
The total number of characters left and
the number of messages needed for
sending are displayed.
To send messages, the correct message
centre number must be stored in your
device. Normally, this number is set by
default through your SIM card. To set the
number manually, select
Messaging
messages
>
centre, and enter a name and the number
from the service provider.
Write text
Text modes
To enter text (for example, when writing
messages) you can use traditional or
predictive text input.
Menu
Msg. settings
>
Message centres
>
Text
>
Add
>