Table of Contents
Advertisement
Web Access
To increase the security on accessing the Web-based Utility, you can enable HTTPS. Once
enabled, users need to use https:// when accessing the Web-based Utility.
•
Web HTTPS Access—The default is Disabled.
•
Wireless Web Access—Allow or deny wireless clients to access Web based Utility. The
default is Enabled.
Remote Console
To exchange data over a secure channel between two computers, you can enable Secure Shell
(SSH).
•
Secure Shell (SSH)—The default is Disabled.
SNMP
SNMP is a popular network monitoring and management protocol. It provides network
administrators with the ability to monitor the status of the Access Point and receive notification
of any critical events as they occur on the Access Point.
To enable the SNMP support feature, select Enabled. Otherwise, select Disabled. The default is
Disabled.
Identification
•
Contact—Enter the name of the contact person, such as a network administrator, for
the Access Point.
•
Device Name—Enter the name you wish to give to the Access Point.
•
Location—Enter the location of the Access Point.
•
Get Community—Enter the password that allows read-only access to the Access Point's
SNMP information. The default is public.
•
Set Community—Enter the password that allows read/write access to the Access
Point's SNMP information. The default is private.
•
SNMP Trap-Community—Enter the password required by the remote host computer
that will receive trap messages or notices sent by the Access Point.
•
SNMP Trusted Host—You can restrict access to the Access Point's SNMP information by
IP address. Enter the IP address in the field provided. If this field is left blank, then access
is permitted from any IP address.
•
SNMP Trap-Destination—Enter the IP address of the remote host computer that will
receive the trap messages.
Change these settings as described here and click Save Settings to apply your changes, or click
Cancel Changes to cancel your changes. Help information is displayed on the right-hand side
of the screen, and click More for additional details.
WAP4410N User Guide
Configuring the Wireless-N Access Point
The Administration - Management Tab
33
Advertisement
Table of Contents
