Stabilitrak System; Panic Brake Assist - Cadillac SRX 2004 Owner's Manual

Hide thumbs Also See for Cadillac SRX 2004:
Table of Contents

Advertisement

®
Stabilitrak
System
Your vehicle is equipped with a vehicle stability
enhancement system called Stabilitrak
advanced computer controlled system that assists you
with directional control of the vehicle in difficult
driving conditions.
®
Stabilitrak
activates when the computer senses a
discrepancy between your intended path and the
direction the vehicle is actually traveling. Stabilitrak
selectively applies braking pressure at any one of
the vehicle's brakes to help steer the vehicle in the
direction which you are steering.
When the system activates, a Stability System Engaged
message will be displayed on the Driver Information
Center. See DIC Warnings and Messages on page 3-64.
You may also hear a noise or feel vibration in the
brake pedal. This is normal. Continue to steer the
vehicle in the direction you want it to go.
If there is a problem detected with Stabilitrak
Stability System message will be displayed on the Driver
Information Center. See DIC Warnings and Messages
on page 3-64. When this message is displayed, the
system is not operational. Driving should be adjusted
accordingly.
Stabilitrak
your vehicle. To help assist you with directional
control of the vehicle, you should always leave the
®
system on. You can turn Stabilitrak
. It is an
need to through the TC (traction control) on/off button.
See Traction Control System (TCS) on page 4-9.
If your vehicle is in cruise control when the Stabilitrak
activates, the cruise control will automatically
disengage. When road conditions allow you to safely
®
use it again, you may reengage the cruise control.
See "Cruise Control" under Turn Signal/Multifunction
Lever on page 3-8 for more information.

Panic Brake Assist

Your vehicle has a panic brake assist system that
monitors the intention of the driver while braking. If the
system senses that the driver has applied hard/fast
pressure to the brake pedal, the system will generate
additional pressure, making it easier for the driver
®
, a Service
to maintain brake application. When this happens the
brake pedal will feel easier to push. Just hold the brake
pedal down firmly and let the system work for you.
You may feel the brakes vibrate, or you may notice
some noise but this is normal. The brakes will return
to normal operation after the brake pedal has been
released.
®
comes on automatically whenever you start
®
off if you ever
®
4-11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents