Final Spin - GE PTAN9150MWW Technical Service Manual

Washer start draining until "minimum" level is reached.
•
After level is reached, washer starts spinning basket, ramping up to
•
400 RPM
Washer then slows down to 230 RPM, then ramps up to spin speed
•
selected by consumer
If washer CANNOT reach desired spin speed, motor shut off until
•
speed reaches 300 RPM
After reaching 300 RPM, washer attempts to ramp up to final spin
•
speed again.
If successful, spin lasts approx 16 minutes total
•
If UNSUCCESSFUL at attaining desired spin speed BUT unit has only
•
performed 1 Deep Rinse, washer does another Deep Rinse cycle.
If UNSUCCESSFUL at attaining desired spin speed AND unit has al-
•
ready performed 2 deep rinses, washer stops and an error code is
logged. (See codes page 55)

Final Spin

25