•
The display will initially show "t6".
•
Once the Start button is pushed, the Display will initially
toggle between "t6" and the spin RPM's (About
1000RPM ± 30RPM).
•
The Drain pump will automatically turn ON until there is
no water in the tub, and then drain pump will cycle off.
Washer will spin at the HIGH setting. The control will
remain in this state for maximum of 3 minutes (or until
the Cycle or Start button is pressed). When Start button
is pressed, returns to "t6". When Cycle button is
pressed, exit the test and advance to next test "t7".
g
GE imagination at work
Test 6 – Spin Test
GE Profile HE Washer (3/3/08)
GE CONFIDENTIAL & PROPREITARY INFORMATION - NOT FOR PUBLIC DISCLOSURE
Copyright 2008 General Electric Company
15