Troubleshooting
If...
Picture orientation is not
accurate
Flash does not fire
Storage location is almost
or entirely full
You cannot take a picture
Error message appears on
EVF/LCD screen
Memory card not
recognized or camera
freezes with card.
68
Try one or more of the following
■
Set the Orientation Sensor to ON
■
Check if external flash is designated in Setup
■
Check the flash setting and change as needed
■
Transfer pictures to the computer
■
Delete pictures from the card or insert a new one
■
Change image storage location to internal memory
(page
46).
■
Turn the camera off, then on again.
■
Depress shutter button all the way
■
Insert a charged battery
■
Memory full. Transfer pictures to the computer
delete pictures from the camera
image storage location, or insert a new card.
■
Follow action recommended on screen.
■
Note error number, if given; then turn the camera off then
back on.
■
Remove the battery and wipe the contacts with a clean, dry
cloth
(page
86), then reinstall it.
■
Remove memory card from the camera.
■
Wait for any blinking lights to stop; then turn the camera off
then back on.
■
If all else fails, get customer support help (see
■
Card may be corrupted. Format card in camera (see
Data will be erased if formatted.
■
Use another memory card.
(page
47).
(page
19).
(page
5).
(page
2).
(page
17) or card, change
www.kodak.com/go/support
(page
48).
(page
36).
(page
17).
(page
19),
page
73).
page
4).