Changing Pasm Or C1, C2, C3 Mode Settings; Using Exposure Compensation With Exposure Bracketing - Kodak EasyShare P850 User Manual

Doing more with your camera

Changing PASM or C1, C2, C3 mode settings

PASM and C modes control the f-number (aperture), shutter speed, exposure
compensation, and flash compensation.
PASM & C mode options
White—selectable
Grey—non-selectable
Yellow—changeable value
Red—out-of-range

Using exposure compensation with exposure bracketing

In PAS modes, you can use exposure compensation in conjunction with exposure
bracketing.
If exposure
compensation is
set to
0.0
+1.0
–1.0
38
1 Turn the Mode dial to P, A, S, M, or C1, C2, C3.
2 Use the Command dial and Set button:
Turn the Command dial to move the selection
■
arrow between the available settings.
NOTE: For C1, C2, or C3, choose custom exposure
setting (PASM) in the
see page
■ Press the Set button to open a setting.
Turn the Command dial to adjust the setting, then
■
press Set to close.
3 Press the Menu button to change other settings (see
page 42).
4 Take a picture.
And if the exposure
bracketing interval is
set to 3 steps
Interval is set to 0.3
50.
Then the exposures taken
are
–0.3, 0.0, +0.3
+0.7, +1.0, +1.3
–1.3, –1.0, –0.7
www.kodak.com/go/support
Menu,