Download Print this page

NEC Audio Emcee User Manual page 7

Nec audio emcee cd player users guide
Hide thumbs

Advertisement

Checking your program order:
Press "STOP". Then press "CHECK". Each time you press check, the display
shows the track number in the order you programmed it. After the last track is
shown, the display will show "END".
Adding or removing tracks from your program:
The best way to add or remove tracks is to reprogram the player. If tracks are
added or removed without reprogramming the player, it will return to you original
program in the event of a power outage.
Note: In case of a power failure, or if player is turned off, original tracks will be
reinstalled when player is powered up again.
To erase the tracks stored in memory, press "STOP" twice.
© 2005-2006 NEC America,
Inc.
The material contained
herein is subject to change
without prior notice at the
sole discretion of NEC
America, Inc.
NEC Corporation
6555 N. State Highway 161
NEC America, Inc.
Document Revision 3
Document Revision 3
For more information
contact:
NEC American, Inc.
Irving, TX 75039-2402
www.cng.nec.com
7

Advertisement

loading