Advertisement
Coffee Maker RHCM‐11001 User Manual
Control panel operation:
1. When connect to power, LCD display "12.00", "RUN" and "AUTO" lamp not indicate.
2. Press "ON/OFF" button one time, "RUN" lamp light and start brewing LCD display clock.
3. AUTO operate procedure:
(1) After press "ON/OFF" button two times. "RUN" lamp indicator off. "AUTO" lamp on.
(2) Clock setup:
(A) After press "PROG" button one time, LCD display "CLOCK", it means that clock is in setup state.
(B) Minute setup: as above, press "MIN" button longer than 2 seconds, the time will increase about
(C) A finer setting time, press "PROM" bottom until the hour and minute on LCD all Disappear.
(3) Timer setup:
(A) Press" PROG" button two times, LCD display "TIMER" and in timer state. Then select "hour" or
(B) After waiting for 5 seconds, it in automatic state. If the clock time is the same as the timer, the
4. After press "ON" button three times. "ON" lamp off and machine stop working
5. If you do not stop the machine by hand, after 2 hours it will stop heating wherever in manual or auto.
6. There is no remember function.
Technical information:
Input voltage: 120 VAC
Power : 950-1100 W
Container : 0.5 Gallon
Cleaning:
1. Do not forget to remove the plug from the socket before cleaning the appliance.
2. Wipe outside with soft dry cloth when coffee machine is wet never use metal polish.
3. The removable items should be washed in hot soapy water. Rinse them before fixing.
4. Wash the filter and carafe.
5. Never use a dishwasher to clean the jug.
6. Put the coffee maker in a dry and not very but place.
Environment friendly disposal
You can help protect the environment!
Please remember to respect the local regulations: hand in the non-working electrical equipment to an
appropriate
Press "HOUR" button first time, LCD display "13:00". LCD will display increase 1 hour after
press every time. If you remain press "HOUR" button longer than 1 second, the time will
increase about 4-5 hours per second.
4-5 minutes per second.
There LCD counter normally if you want to rest the time, repeat A-C.
"MIN" button to set time. Press "PROG" button one time. The word "TIMER" disappear
machine will start working at once, meanwhile the "ON" lamp on, "AUTO" lamp off.
2
Advertisement
