Advertisement
Available languages
Available languages
0 0 0 0
A17
A18
0 0 0 0
H
Connect wiring harness. DO NOT ALLOW THE MOTOR TO
Reinstall the motor by inserting the tabs and pushing up
HANG FROM THE WIRING HARNESS.
into position. Make sure the wires are not pinched
between the motor and the housing.
A19
A20
I
Secure the motor by tightening the 2 screws.
Turn on the power source.
A21
A22
Go to step
O N
E1
O F F
on page 17
to attach grille.
Test the motor. If the motor does not run, check the plug
connection.
41943-01 1/13/2006
7
Advertisement
