Table of Contents
Advertisement
6. After soaking, wipe the base with a soft cloth or sponge to remove any mineral build
up. Rinse with clean water several times. If you are planning on storing the humidi-
fier, be sure the base is completely dry.
7. Empty the tank of the water/vinegar mixture. Rinse the tank several times with clean
water and then replace the tank cap. If you are planning on storing the humidifier, dry it
inside and out, leaving the cap off to allow the tank to completely dry. Continue to clean
the other parts of your humidifier.
8. Remove the main housing from the base. Wipe the surfaces of the main housing with a
soft cloth.
9. Once all the parts are clean, reassemble the humidifier, and follow the USING YOUR
HUMIDIFIER to continue use. If you are storing the humidifier, make sure the
parts are completely dry, reassemble, and store in a dry location.
Service Parts:
To obtain a service part for your humidifier, call customer service at 901-248-2222
or e-mail us at TechSupport@hunterfanhq.com. Please be prepared to tell the op-
erator the model number of your humidifier, the name of the part you need to replace
and the part number. Refer to Figure 1 for part names.
Model
Filter
No.
Frame
32300 64171-04-000 92849-01-235 92851-01-235 64102-01-235 64101-01-235 74079-01-233
32350 64171-03-000 92850-01-236 92852-01-236 64102-01-236 64101-01-236 74079-01-233
32400 64171-02-000 92850-01-236 92852-01-235 64102-01-235 64101-01-235 74079-01-233
32500 64171-03-000 92850-01-236 92852-01-236 64102-01-236 64101-01-236 74079-01-233
34500 64171-03-000 92850-01-235 92852-01-236 64102-01-236 64101-01-236 74079-01-233
FORM 41283-01
Water
Base
Tank
Knob A
Knob B
7
Tank
Cap
Filters
31913
31915
31914
31915
31915
© 2003 HUNTER FAN CO.
Advertisement
Table of Contents
