Table of Contents
Advertisement
Advanced Configuration
4.4.3
DHCP Server
The Advanced Setup > DHCP Server page allows you to configure the
built-in DHCP server.
The HM410dp incorporates a DHCP server that dynamically assigns IP
addresses and serves as a DNS server to the PCs on your LAN.
By default there is one DHCP Server Subnet created for the LAN interface.
The IP address range on the LAN interface is 192.168.1.2 through
192.168.1.21.
Note:
4.4.3.1
Enable/Disable the DHCP Server
The current status of the DHCP server is displayed on the top of the DHCP
Server page. If enabled (default) a
click on to disable the DHCP server. When the DHCP server is disabled the
button shows
44
By default the DHCP server is enabled on the private LAN interface
but if you already have a DHCP server on your network you should
disable this function.
instead.
Enable
button is shown which you
Disable
1553-ZAT 759 94 Uen A – October 2004
Advertisement
Table of Contents
